+Article 49 Derogations for specific situations

Article 49 Derogations for specific situations

Article 49

Derogations for specific situations

1.  

In the absence of an adequacy decision pursuant to Article 45(3), or of appropriate safeguards pursuant to Article 46, including binding corporate rules, a transfer or a set of transfers of personal data to a third country or an international organisation shall take place only on one of the following conditions:

(a) 

the data subject has explicitly consented to the proposed transfer, after having been informed of the possible risks of such transfers for the data subject due to the absence of an adequacy decision and appropriate safeguards;

(b) 

the transfer is necessary for the performance of a contract between the data subject and the controller or the implementation of pre-contractual measures taken at the data subject's request;

(c) 

the transfer is necessary for the conclusion or performance of a contract concluded in the interest of the data subject between the controller and another natural or legal person;

(d) 

the transfer is necessary for important reasons of public interest;

(e) 

the transfer is necessary for the establishment, exercise or defence of legal claims;

(f) 

the transfer is necessary in order to protect the vital interests of the data subject or of other persons, where the data subject is physically or legally incapable of giving consent;

(g) 

the transfer is made from a register which according to Union or Member State law is intended to provide information to the public and which is open to consultation either by the public in general or by any person who can demonstrate a legitimate interest, but only to the extent that the conditions laid down by Union or Member State law for consultation are fulfilled in the particular case.

Where a transfer could not be based on a provision in Article 45 or 46, including the provisions on binding corporate rules, and none of the derogations for a specific situation referred to in the first subparagraph of this paragraph is applicable, a transfer to a third country or an international organisation may take place only if the transfer is not repetitive, concerns only a limited number of data subjects, is necessary for the purposes of compelling legitimate interests pursued by the controller which are not overridden by the interests or rights and freedoms of the data subject, and the controller has assessed all the circumstances surrounding the data transfer and has on the basis of that assessment provided suitable safeguards with regard to the protection of personal data. The controller shall inform the supervisory authority of the transfer. The controller shall, in addition to providing the information referred to in Articles 13 and 14, inform the data subject of the transfer and on the compelling legitimate interests pursued.

2.  
A transfer pursuant to point (g) of the first subparagraph of paragraph 1 shall not involve the entirety of the personal data or entire categories of the personal data contained in the register. Where the register is intended for consultation by persons having a legitimate interest, the transfer shall be made only at the request of those persons or if they are to be the recipients.
3.  
Points (a), (b) and (c) of the first subparagraph of paragraph 1 and the second subparagraph thereof shall not apply to activities carried out by public authorities in the exercise of their public powers.
4.  
The public interest referred to in point (d) of the first subparagraph of paragraph 1 shall be recognised in Union law or in the law of the Member State to which the controller is subject.
5.  
In the absence of an adequacy decision, Union or Member State law may, for important reasons of public interest, expressly set limits to the transfer of specific categories of personal data to a third country or an international organisation. Member States shall notify such provisions to the Commission.
6.  
The controller or processor shall document the assessment as well as the suitable safeguards referred to in the second subparagraph of paragraph 1 of this Article in the records referred to in Article 30.

1. Overview

1.1 References

1.2 Identified Requirements

1.3 Related Standards

2. Identified Requirements

Requirements

3. Related Standards

Standards
SCF Transfer of Sensitive and/or Regulated Data

Description

Mechanisms exist to restrict and govern the transfer of sensitive and/or regulated data to third-countries or international organizations.

Possible Solutions & Considerations

Micro-Small Business (<10 staff) / BLS Firm Size Classes 1-2

∙ Model contracts
∙ Binding Corporate Rules (BCR)

Small Business (10-49 staff) / BLS Firm Size Classes 3-4

∙ Model contracts
∙ Binding Corporate Rules (BCR)

Medium Business (50-249 staff) / BLS Firm Size Classes 5-6

∙ Model contracts
∙ Binding Corporate Rules (BCR)

Large Business (250-999 staff) / BLS Firm Size Classes 7-8

∙ Model contracts
∙ Binding Corporate Rules (BCR)

Enterprise (> 1,000 staff) / BLS Firm Size Class 9

∙ Model contracts
∙ Binding Corporate Rules (BCR)

SCR-CMM

Level 0 Not Performed

Practices are non-existent, based on the inability to demonstrate an implemented and operational capability. A reasonable person would conclude the control is not being performed.

Level 1 Performed Informally

SCR-CMM Level 1 criteria definitions are not available for this control:
▪ A reasonable person would conclude this control requires a structured process.
▪ At this level of maturity, the "ad hoc" nature of performing a capability informally would indicate the intent of the control is not met due to a lack of consistency and formality.

Level 2 Planned Tracked

Data Classification & Handling (DCH) capabilities are requirements-driven, but are not standardized across the entity (e.g., local/regional level consistency). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with DCH domain capabilities are formally documented and centrally-managed by the entity.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are documented and maintained by process owners.
▪ IT and/or cybersecurity personnel work with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with DCH domain capabilities to address applicable statutory, regulatory and/or contractual requirements for Technology Assets, Applications, Services and/or Data (TAASD).
▪ Data classification and handling-related controls are primarily administrative and preventative in nature (e.g., policies, standards, procedures & guidelines).
▪ Data classification and handling management may be a defined function (e.g., team or department) or assigned as an additional duty to existing IT and/or cybersecurity personnel.
▪ A formalized data classification scheme exists to identify categories of data, based on protection requirements from applicable laws, regulations and/or contractual obligations.

Level 3 Well Defined

Data Classification & Handling (DCH) capabilities are standardized across the entity for applicability to People, Processes, Technologies, Data and/or Facilities (PPTDF) to ensure consistency for Technology Assets, Applications, Services and/or Data (TAASD). Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Policies and standards associated with DCH domain capabilities are formally documented and centrally-managed by the entity's Governance, Risk & Compliance (GRC) team, or similar function.
▪ Standardized Operating Procedures (SOP) associated with DCH domain capabilities are well-documented and kept current by process owners.
▪ A Governance, Risk & Compliance (GRC) team, or similar function, is appropriately staffed and supported to implement and maintain DCH domain capabilities.
▪ Technology is leveraged to enhance the efficiency and accuracy of data classification and handling operations (e.g., GRC platform).
▪ The entity's Governance, Risk & Compliance (GRC) team, or similar function, works with business stakeholders and process owners to appropriately scope and reasonably implement cybersecurity and data protection controls associated with DCH domain capabilities to address Minimum Compliance Requirements (MCR) (e.g., applicable statutory, regulatory and/or contractual requirements) and Discretionary Security Requirements (DSR) (e.g., entity-required controls).
▪ An implemented and operational capability exists to restrict and govern the transfer of sensitive and/or regulated data to third-countries or international organizations.

Level 4 Quantitatively Controlled

Data Classification & Handling (DCH) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Metrics reporting includes quantitative analysis of Key Performance Indicators (KPIs).
▪ Metrics reporting includes quantitative analysis of Key Risk Indicators (KRIs).
▪ Scope of metrics, KPIs and KRIs covers organization-wide cybersecurity and data protection controls, including functions performed by third-parties.
▪ Organizational leadership maintains a formal process to objectively review and respond to metrics, KPIs and KRIs (e.g., monthly or quarterly review).
▪ Based on metrics analysis, process improvement recommendations are submitted for review and are handled in accordance with change control processes.
▪ Business and technical stakeholders are involved in reviewing and approving proposed changes to evolve capabilities.

Level 5 Continuously Improving

Data Classification & Handling (DCH) capabilities, in addition to being standardized across the entity and centrally managed to ensure consistency across Technology Assets, Applications, Services and/or Data (TAASD), efforts are metrics driven to provide sufficient insight for decision makers to predict optimal performance, ensure continued operations and/or identify areas for improvement. Capability criteria associated with this control reasonably expect the following criteria to exist:
▪ Applicable SCR-CMM Level 3 (Well Defined) capabilities are implemented and operational.
▪ Based on predictive analysis, process improvements are implemented according to “continuous improvement” practices that affect process changes.
▪ Stakeholders make time-sensitive decisions to support operational efficiency, which may include automated remediation actions.
Impressum German English